Home
Parts List to Build a Telecaster
Guitar Workstation
Warmoth Telecaster Body
Warmoth Birdseye Maple Telecaster Neck
Gotoh Kluson Tuners
Installing String Ferrules
Installing the Fender Vintage 3-Saddle Bridge
Shielding the Pickup Cavities
Assembling the Switch and Pots to Control Plate
Wiring the Pickups, Input Jack, Switch and Pots
Wiring the Pickups
Installing Input Jack
Installing Pickguard
Dressing the Frets
Installing the Strap Pegs
Guitar Set-Up
Finished Guitar Pics
Overview of Complete Building Process
Resources and Links
Guitar Parts  Calculator
Website Details
Building a 1963 Telecaster - The Neck - Warmoth Birdseye Maple
Click on each image below for a larger view.
Warmoth Birdseye Maple Telecaster Neck - with Compound 10" - 16" Radius; Vintage Tint Gloss; Corian Nut Installed.

Building a 1963 Lake Placid Telecaster - Home
100-Neck.JPG
Warmoth Birdseye Maple Telecaster Neck

100-Neck.JPG
101-Neck.JPG
Heel…Warmoth stamped

101-Neck.JPG
102-Neck.JPG
The neck in the shipping box as I received it.

102-Neck.JPG
103-Neck.JPG
Close-up of the headstock front.

103-Neck.JPG
104-Neck.JPG
Close-up of the nut and first frets.

104-Neck.JPG
105-Neck.JPG
Another picture in the shipping box.

105-Neck.JPG
106-Neck.JPG
The back of the headstock.

106-Neck.JPG
107-Neck.JPG
Close-up of the headstock heel.

107-Neck.JPG
108-Neck.JPG
Close-up of the back of the neck.

108-Neck.JPG
109-Neck.JPG
The images that were posted on Warmoth's website.

109-Neck.JPG
110-Neck.JPG
Warmoth's return policy was 30 days I thought it prudent to inspect the neck.

110-Neck.JPG
111-Neck.JPG
Checking the neck for straightness.

111-Neck.JPG
112-Neck.JPG
Checking down the neck to ensure it is straight.

112-Neck.JPG
113-Neck.JPG
Another straightness check…

113-Neck.JPG
114-Neck.JPG
Another straightness check…

114-Neck.JPG
115-Neck.JPG
Another straightness check…

115-Neck.JPG
116-Neck.JPG
Preparing to attach the neck to the body - setting it in the neck cavity.

116-Neck.JPG
117-Neck.JPG
Attaching the four neck screws and the neck plate.

117-Neck.JPG
118-Neck.JPG
Tightening the neck screws.

118-Neck.JPG
119-Neck.JPG
I set my cordless screwdriver's clutch at approximately 40%.

119-Neck.JPG
120-Neck.JPG
Another angle of the neck plate and screws.

120-Neck.JPG
121-Neck.JPG
The neck attached.

121-Neck.JPG


All Photos (unless otherwise noted) Copyright © 2011, HiggyDude and Bobby Jean Enterprises
Website - Copyright © 2011, HiggyDude and Bobby Jean Enterprises